Toshiba B-SX5 Series - Page 80

- 77 -
< 3 > A D J U S T S E T
T O N E A D J . < D > - 2
< 3 > A D J U S T S E T
R B N A D J < F W > - 1 0
< 3 > A D J U S T S E T
R B N A D J < B K > - 5
< 3 > A D J U S T S E T
T H R E S H O L D < R > 1 . 0 V
< 3 > A D J U S T S E T
T H R E S H O L D < T > 1 . 4 V
< 3 > A D J U S T S E T
[PAUSE]
(19) Print density fine adjustment
(Direct thermal print mode):
Set the fine adjustment value using the
[FEED] and [RESTART] keys.
(20) Press the [PAUSE] key.
(21) Ribbon motor drive voltage fine
adjustment (Rewind):
Set the fine adjustment value using the
[FEED] and [RESTART] keys.
(22) Press the [PAUSE] key.
(23) Ribbon motor drive voltage fine
adjustment (Back tension):
Set the fine adjustment value using the
[FEED] and [RESTART] keys.
(24) Press the [PAUSE] key.
[PAUSE]
[PAUSE]
[PAUSE]
[PAUSE]
(25) Reflective sensor manual threshold fine
adjustment:
Set the fine adjustment value using the
[FEED] and [RESTART] keys.
(26) Press the [PAUSE] key.
(27) Transmissive sensor manual threshold
fine adjustment:
Set the fine adjustment value using the
[FEED] and [RESTART] keys.
(29) The fine adjustment value setting menu
is displayed.
(28) Press the [PAUSE] key.