Toshiba B-SX5 Series - Page 91

- 88 -
< 4 > T E S T P R I N T
P R T T Y P E T R A N S F R
< 4 > T E S T P R I N T
T Y P E [ S ] N O C U T
< 4 > T E S T P R I N T
L A B E L L E N . 7 6 m m
< 4 > T E S T P R I N T
P A P E R F E E D
< 4 > T E S T P R I N T
< 4 > T E S T P R I N T
P R I N T C O N D I T I O N
< 4 > T E S T P R I N T
S L A N T L I N E ( 1 D O T )
< 4 > T E S T P R I N T
S L A N T L I N E ( 3 D O T )
< 4 > T E S T P R I N T
C H A R A C T E R S
< 4 > T E S T P R I N T
(19) Print type setting mode:
Select the print type using the [FEED]
and [RESTART] keys.
(20) Press the [PAUSE] key.
[PAUSE]
(21) Issue type setting mode:
Select the issue type using the [FEED]
and [RESTART] keys.
(22) Press the [PAUSE] key.
[PAUSE]
(23) Label size setting mode:
Set the label length using the [FEED]
and [RESTART] keys.
(24) Press the [PAUSE] key.
[PAUSE]
(25) One label feed mode:
Set the mode using the [FEED] and
[RESTART] keys.
(26) Press the [PAUSE] key.
(One label is fed.)
[PAUSE]
(27) System mode menu display
(Test print)
(29) Test print condition setting mode
(33) 3-dot slant line printout mode
(32) Press the [FEED] key.
[FEED]
(35) Character printout mode
(28) Press the [PAUSE] key.
[PAUSE]
(31) 1-dot slant line printout mode
(30) Press the [FEED] key.
[FEED]
(37) System mode menu display
(Test print)
(34) Press the [FEED] key.
[FEED]
(36) Press the [PAUSE] key.
(One label is printed.)
[PAUSE]