Toshiba B-SX5 Series - Setting Contents

- 91 -
6.5.2 Setting Contents
(1) Test print mode selection
• PRINT CONDITION (Test print condition parameter setting)
• SLANT LINE (1DOT) (1-dot slant line printout)
• SLANT LINE (3DOT) (3-dot slant line printout)
• CHARACTERS (Character printout)
• BARCODE (Bar code printout)
• NON-PRINTING (Nothing prints)
• FACTORY TEST (Line printout for assembly process)
• AUTO PRINT (TRAN) (Assembly process automatic
printout/transmissive sensor)
• AUTO PRINT (REFL) (Assembly process automatic
printout/reflective sensor)
(2) Test print condition parameter setting (PRINT CONDITION)
• ISSUE COUNT (Issue count setting)
• PRINT SPEED (Print speed)
• SENSOR (Sensor selection)
• PRT TYPE (Print type)
• TYPE (Issue type)
• LABEL LEN. (Label size)
• PAPER FEED (Paper feed mode)
• <4> TEST PRINT (Test print mode)
• PRINT CONDITION (Print condition parameter setting)
(3) Issue count setting (ISSUE COUNT)
• 5000 (Issue count: 5000)
• 1000 (Issue count: 1000)
• 500 (Issue count: 500)
• 100 (Issue count: 100)
• 50 (Issue count: 50)
• 10 (Issue count: 10)
• 5 (Issue count: 5)
• 3 (Issue count: 3)
• 1 (Issue count: 1)
(4) Print speed (PRINT SPEED)
B-SX4 B-SX5
• 10”/sec (10 inches/sec) • 8”/sec (8 inches/sec)
• 6”/sec (6 inches/sec) • 5”/sec (5 inches/sec)
• 3”/sec (3 inches/sec) • 3”/sec (3 inches/sec)
FEED
RESTART
PAUSE
FEED
RESTART
FEED
RESTART