Toshiba B-SX5 Series - 1-Dot Slant Line (Black Area Ratio: 16.7%)

- 94 -
• For B-SX4, the print speed “10 ips” is not supported for printing with the rotary cutter. If
“10 ips” is specified when the rotary cutter has been installed, the print speed is corrected
from 10 ips to 6 ips, regardless of the cut designation.
For B-SX4, if less than 15.0 mm and 30.0 mm of the label pitch is specified for printing at
3 ips and 6 ips, respectively, an issue without a cut is performed.
For B-SX5, if less than 15.0 mm, 25.0 mm, 38.0 mm of the label pitch is specified for
printing at 3 ips, 5 ips, and 8 ips, respectively, an issue without a cut is performed.
• Magnification of slant lines is as follows:
1-dot slant line (Black area ratio: 16.7%)
3-dot slant line (Black area ratio: 16.7%)