Toshiba B-SX5T Series - Page 108

APPENDIX 2 INTERFACE ENGLISH VERSION EO1-33059
APPENDIX 2 INTERFACE
EA2- 3
 Serial interface (Standard)
Type: RS-232C
Communication mode: Full duplex
Transmission speed: 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps, 115200 bps
Synchronization: Start-stop synchronization
Start bit: 1 bit
Stop bit 1 bit, 2 bit
Data length: 7 bit, 8 bit
Parity: None, EVEN, ODD
Error detection: Parity error, Framing error
Protocol: Unprocedure communication
Data input code: ASCII code, European character 8 bit code, graphic 8 bit code, JIS8 code, Shift JIS
Kanji code, JIS Kanji code
Receive buffer: 6M byte
Connector:
Pin No. Signal
1 FG
2 RD (Received Data)
3 TD (Transmit Data)
4 CTS (Clear to Send)
5 RTS (Request to Send)
6 DTR (Data Terminal Ready)
7 SG (Signal Ground)
20 DSR (Data Set Ready)
 USB interface (Option: B-9700-USB-QM-R)
Physical Layer: Conforming to V1.1 Full speed
Transfer type: Control transfer, Bulk transfer
Transfer rate: Full speed (12M bps)
Class: Printer class
Number of ports: 1
Power source: Self power
Connector: Type B
Pin No. Signal
1 VCC
2 D-
3 D+
4 GND
Series B Plug