Toshiba B-SX5T Series - Page 75

2. PRINTER SETUP ENGLISH VERSION EO1-33059
2.12 Position and Print Tone Fine Adjustment
E2-61
2.12 Position and Print
Tone Fine
Adjustment (Cont.)
After selecting a fine adjustment value, press the [PAUSE] key.
Reverse Feed Amount Fine Adjustment
NOTES:
Choose a desired value by using the
[RESTART] or [FEED] key.
P
ressing the [FEED] key one time
causes a –0.5mm change, up to
–
9.5 mm.
P
ressing the [RESTART] key one
time causes a +0.5mm change, up
to +9.5 mm.
• Example of Reverse Feed Amount Fine Adjustment
When setting +3.0 mm
Compared with “+0.0mm” position, the print start position
after a reverse feed is shifted forward.
When setting +0.0 mm
When setting –3.0 mm
Compared with “+0.0mm” position, the print start position
after a reverse feed is shifted backward.
[RESTART]
[FEED]
BACK ADJ.+9.5mm
BACK ADJ.+9.0 mm
BACK ADJ.+0.0mm
BACK ADJ.-9.0mm
BACK ADJ.-9.5mm
BACK ADJ.-0.5mm
BACK ADJ.+0.5mm
<3>ADJUST SET
BACK ADJ. +5.0mm
3mm
Print Start Position after a
reverse feed
Print Start Position after a
reverse feed
3mm
Feed Direction
Feed Direction
Print Start Position after a
reverse feed
Feed Direction