123
8.10.3.3 READ RETRY
The number of times tag read is retried and the timeout for read retry are set.
(1) The number of times tag read is retried
The printer retries to read the data in an RFID tag for up to the specified number of times. If the data
readretry period expired before the specified number of retries, the printer stops the retries at the time.
Whenever the printer writes data onto an RFID tag, the tag will be read first. The max. number of retries set
by this parameter is also used for this pre-read.
(2) The timeout for RFID tag read retry
The printer retries to read the data in an RFID tag for the specified length of time. If the printer has retried
for the specified number of times within the RFID read retry period, the printer stops the retries at the time.
Whenever the printer writes data onto an RFID tag, the tag is read first. The read retry timeout set by this
parameter is also used for this pre-read.
8.10.3.4 WRITE RETRY
The number of times tag write is retried and the timeout for write retry are set.
(1) The number of times tag write is retried
The printer retries to write data onto an RFID tag for up to the specified number of times. If the data write
period expired before the specified number of retries, the printer stops the retries at the time.
(2) The timeout for RFID tag write retry
The printer retries to write data on an RFID tag for the specified length of time.
If the printer has retried for the specified number of times within the RFID write retry timeout, the printer
stops the retries at the time.
To Next Page
Loading...
