Toshiba BA400 Series - Page 48

43
4-1
PRINT TYPE C1.6
▲
DIRECT THERMAL
▼
THERMAL TRANSFER
DISPLAY
1. Select either THERMAL TRANSFER or DIRECT
THERMAL.
2. Press the [PAUSE] key.
3. PAPER CUTTING? Menu is displayed.
4-2
PAPER CUTTING?
C1.6
▲
YES
▼
NO
(Printing…)
CHECKING & PRINT
PRINTING
1. Select YES or NO.
2. Press the [PAUSE] key.
3. The maintenance counter data and parameter settings
are printed.
4. “PRINTING” is displayed.
Note: A print sample is provided in Section 9.4.1.1
Maintenance Counter/Parameter Settings Print Contents.
4-3
When the printing is completed. (Normal end)
PRINT TYPE C1.6
▲
DIRECT THERMAL
▼
THERMAL TRANSFER
DISPLAY
1. When the printing is completed, PRINT TYPE menu is
displayed again.
4-4
When an error occurred during printing
CHECKING & PRINT
RIBBON ERROR
The printer displays the error message, and stops.
The ERROR LED turns on and the ONLINE LED turns off.
1. Press the [PAUSE] key.
2. PRINT TYPE menu is displayed.
PRINT TYPE C1.6
▲
DIRECT THERMAL
▼
THERMAL TRANSFER
DISPLAY
The printer recovers from the error, the ERROR LED turns
off and the ONLINE LED turns on.
Note that the printer does not reprint the label
automatically.
5.
In the case DISPLAY is selected:
5-1
PRINT TYPE C1.6
▲
DIRECT THERMAL
▼
THERMAL TRANSFER
DISPLAY
1. Select DISPLAY.
2. Press the [PAUSE] key.
3. DISPLAY menu is displayed.
5-2
DISPLAY
▲
COUNTER
ADJUSTMENT(PC)
USB SERIAL NUMBER
▼
STORAGE AREA
1. Select an item to be displayed.
2. Press the [PAUSE] key.
3. The data of the selected item is displayed.
5-3
COUNTER
▲
TOTAL FEED 4.8km
FEED 0.0km
FEED1 4.8km
FEED2 0.0km
▼
For details of the Maintenance counter data, refer to
Section 8.4.1.2 Maintenance Counter/Parameter Settings
Print Contents.