Toshiba BA400 Series - Page 52

47
<< ADJUST >>
Item
Description
Remarks
[PC]/[KEY]
FEED
Feed amount fine adjustment
-50.0mm to +50.0mm
CUT
Cut position (or strip position) fine
adjustment
-50.0mm to +50.0mm
BACK
Reverse feed amount fine adjustment
-9.9mm to +9.9mm
TONE (T)
Print density fine adjustment
(Thermal transfer print mode)
-10 to +10 step
TONE (D)
Print density fine adjustment
(Direct thermal print mode)
-10 to +10 step
RIBBON TORQUE NORM
RBN (FW)
Ribbon motor drive voltage fine
adjustment (Ribbon take-up side)
-15 to +10 step
RBN (BK)
Ribbon motor drive voltage fine
adjustment (Ribbon supply side)
-15 to +10 step
RIBBON TORQUE LOW
RBN (FW)
Ribbon motor drive voltage fine
adjustment (Ribbon take-up side)
-15 to +10 step
RBN (BK)
Ribbon motor drive voltage fine
adjustment (Ribbon supply side)
-15 to +10 step
X ADJ.
X-coordinate fine adjustment
- 99.9mm to + 99.9mm
X-coordinate method
TYPE1/TYPE2
THRESHOLD<R>
Threshold fine adjustment for
reflective sensor
From left to right, fine value 1, fine
value 2, ..., fine value 5
0.0V to 4.0V
THRESHOLD<T>
Threshold fine adjustment for
transmissive sensor
From left to right, fine value 1, fine
value 2, ..., fine value 5
0.0V to 4.0V