Toshiba BA410T Series - Printer Operation Panel and Interior

1. PRODUCT OVERVIEW ENGLISH VERSION
1.4 Appearance
E1-
4
1.4.4 Operation Panel
1.4.5 Interior
Please see Section 4.1 for further information about the Operation Panel.
LCD Message
Display
ON LINE LED
(
Blue)
ERROR LED
(Orange)
[PAUSE] key
[FEED] key
[RESTART] key
WARNING!
1. Do not touch the Print Head
or around it just after
printing. You may get
burned as the Print Head
becomes very hot during
printing.
2. Do not touch any moving
parts. To reduce the risk of
fingers, jewellery, clothing,
etc., being drawn into the
moving parts, be sure to
load the media once the
printer has stopped moving
completely.
3. To avoid injury, be careful
not to trap your fingers
while opening or closing th
e
cover.
4.
・ Hot Part
・ You may get burned
・ The stepping motor will
become very hot after
media is issued
continuously for about 1
hour. Care must be taken
not to touch it when the
front cover is opened
Ribbon Stopper
(Take-up side)
Ribbon Cover
Print Head
Head Position Lever
Media Guide
Media Holder Ass’y
Platen
Caution symbol for the
print head (Please refer
to WARNING 1)
Supply Path
Label
Caution Labels:
Head Position
Lever
Head Position (Refer to Section 2.3 Loading
the Media)
Caution symbol for the stepping motor
(Please refer to WARNING 4.)