2. PRINTER SETUP ENGLISH VERSION
2.3 Loading the Media
E2-
9
2.3 Loading the Media
(Cont.)
(2) Press down the Release Bar to open the Strip Module.
(3) Remove enough labels from the leading edge of the media to leave
300mm of backing paper free.
(4) Pass the backing paper through the opening under the Backing Paper
Feed Roller. Then, close the Strip Module until it clicks.
(5) Insert the leading edge of the backing paper into the slot of the Front
Cover.
(6) Close the Front Cover and the Top Cover.
Be sure to close the Strip
Module completely. Failure to
do this may cause a paper
Backing Paper Feed Roller
To Next Page
Loading...
