Toshiba BC Series - Specifications; Features

11 / 73
Copyright © 2019 Toshiba Teli Corporation, All Rights Reserved. http://www.toshiba-teli.co.jp/en/
D4296087A
Specifications
Overview
This BC series is an integrated-(one-body)-type camera that adopts a global shutter CMOS sensor.
These are BC040M (0.4M 1/2.9 type), BC160M (1.6M 1/2.9 type).
It is easy to integrate into industrial equipment.
Features
● High frame rate and high resolution
Supporting high frame rate, BC040M 523fps, BC160M 148fps.
● Global shutter
As it employs a global electronic shutter similar to a CCD image sensor, clear images of even fast-moving
object are obtainable with less blur.
● CameraLink interface (Power over CameraLink)
By using a CameraLink-capable frame grabber board to which power can be supplied, high-speed transfer
of captured images to a PC as well as various types of camera control from the PC are allowed. Power can
also be supplied to the camera with only one cable.
● IIDC2 Digital Camera Control Specification Ver.1.1.0
This product is based on IIDC2 Digital Camera Control Specification Ver.1.1.0
● Random Trigger Shutter
The Random Trigger Shutter function provides images in any timing by input of an external trigger signal.
Trigger control from PC is available as well.
● Scalable
Selectable video output area. This mode achieves higher frame rate by reducing vertical output area. And
reduces occupied data rate of Gigabit Ethernet by reducing horizontal output area.