Notes on Connection:
- Please confirm the power supply of the camera off when plugging in or pulling out the CameraLink cable. It causes the
breakdown.
- If your camera is used in a system where its connectors are subjected to strong repetitive shocks, its connectors are
possible to break down. If you use your camera in such a situation, use a CameraLink cable with a lock screw, and
secure the camera cable as close as possible to the camera body for avoid physical shock to the camera connector.
- Disturbances in the captured image may occur by an electrical characteristic of the transmission line of using
CameraLink devices (CameraLink cable, Grabber Board).
To Next Page
Loading...
