27 / 73
Copyright © 2019 Toshiba Teli Corporation, All Rights Reserved. http://www.toshiba-teli.co.jp/en/
0x0:Normal shutter mode 0x1:Random trigger Shutter mode
0x0:Fix mode, 0x1:Level mode
Selects a trigger source of random trigger shutter.
0x0:Line0(CC1),0x40:Software
Sets the delay from trigger detection to exposure start.
*TriggerDelay / 37500000 [sec]
0x0(0sec) ~ 0x47868C0(2sec)
0x8:Execute SoftwareTrigger
0.4M:Min:0x1,Max:0x2
1.6M:Min:0x1,Max:0x4
0.4M:Min:0x1,Max:0x2
1.6M:Min:0x1,Max:0x4
0.4M:Min:0x1,Max:0x2
1.6M:Min:0x1,Max:0x4
0.4M:Min:0x1,Max:0x2
1.6M:Min:0x1,Max:0x4
0x8:Bpp8,0xA:Bpp10,0xC:Bpp12
Sets the memory channel of UserSet.
0x0:Default,0x1:UserSet1 ~ 0xF:UserSet15
Done : ✓
Load : ✓
Save : -
Erase : -
Read / Write the UserSet.
0x0:Done, 0x8:Load, 0x9:Save, 0x7F:Erase
Selects a channel of user setting when camera powers up.
0x0:Default
0x1:UserSet1 ~ 0x15:UserSet15
Selects the inversion of Line0(CC1).
0x0:Negative,0x1:Positive
Returns the current status of Line0(CC1).
Sets the Reverse Horizontal.
0x0:OFF, 0x1:ON
Sets the Reverse Vertical.
0x0:OFF, 0x1:ON
0x0:OFF
0x1:Black
0x2:White
0x3:GreyA
0x4:GreyB
0x5:GreyHorzontalRamp
0x6:GreyScale
0x8:GreyVerticalRamp
Only BC040M model.
0x0:OFF,0x1:ON