Toshiba BC Series - Page 60

58 / 73
Copyright © 2019 Toshiba Teli Corporation, All Rights Reserved. http://www.toshiba-teli.co.jp/en/
D4296087A
● Register
IIDC2 address
Register
address
Read
Write
Memory
save
Default
Register name
Description
0x0020 703C
R/W
✓
0x0
TriggerMode
0x0:Normal shutter mode 0x1:Random trigger Shutter mode
0x0020 705C
R/W
✓
0x0
TriggerSequence
0x0:Fix mode, 0x1:Level mode
0x0020 707C
R/W
✓
0x0
TriggerSource
Selects a trigger source of random trigger shutter.
0x0:Line0(CC1),0x40:Software
0x0020 70BC
R/W
✓
0x0
TriggerDelay
Sets the delay from trigger detection to exposure start.
*TriggerDelay / 37500000 [sec]
0x0(0sec) ～ 0x47868C0(2sec)
0x0020 70DC
W.O.
-
-
SoftwareTrigger
0x8:Execute SoftwareTrigger
Legacy address
Register
address
Read
Write
Memory
save
Default
Register name
Description
0x91
R/W
✓
0x0
Shutter mode
0x0:Normal shutter(default), 0x1:Random trigger shutter
0x92
R/W
✓
0x0
Random trigger mode
0x0:FIX mode (default), 0x1:pulse width mode
0x93
R/W
✓
0x0
Trigger polarity
0x0:Negative(default), 0x1:Positive
● Note
- In SoftwareTrigger operation, the delay time from ‘TriggerSoftware’ to exposure is not guaranteed.
- TriggerDelay is applied to both of HardwareTrigger and SoftwareTrigger.
Notes on Random Trigger Shutter mode:
- When the interval of the input trigger signal is extremely short, or when the trigger signal is noisy, there is a possibility
of causing the malfunction. In this case, please input a proper trigger signal.