Toshiba BC Series - Sequentialshuttercontrol

68 / 73
Copyright © 2019 Toshiba Teli Corporation, All Rights Reserved. http://www.toshiba-teli.co.jp/en/
D4296087A
SequentialShutterControl
Sequential Shutter function performs sequential capturing with applying the settings of UserSet that have
been made entry in advance. It is not supported when the ShortExposureMode is enable (ON).
ExposureTime = 10ms
...
Sensor
Frame
Exposure
ExposureTime = 2ms
...
ExposureTime = 20ms
...
Image Streaming
on Interface Bus
Exposure1
Frame1
ExposureTime = 10ms
...
Frame2 Frame3 Frame4
Sequence
Index = 1
SequentialShutterTerminateAt = 3
...
...
Exposure2 Exposure3 Exposure4
Sequence
Index = 2
Sequence
Index = 3
Sequence
Index = 1
Entry1 = UserSet1 Entry2 = UserSet4 Entry3 = UserSet2 Entry1 = UserSet1
List of registers to be applied to SequentialShutter
Category
Register name
Category
Register name
ImageFormatControl
OffsetX
AnalogControl
Gain
OffsetY
BlackLevel
ExposureControl
ExposureTime
Gamma
LUTControl
LUTEnable
Notes on SequentialShutter:
- In Sequential Shutter mode, window size is unchangeable.