Toshiba BMS-CT2560U-E - Options for Air to Water Heat Pump (ATW)

54
Central management addresses can be assigned automatically to all indoor units.
Following section explains the automatic assignment procedure.
Automatic assignment
1 Tap [1-(1)] of the [Service settings] items
The following message appears: [Rebooting is necessary when it
is executed. Is it OK?]
2 Tap [2-(1)]
Connection information is acquired. (takes a maximum of about
10 minutes)
If the connection information is acquired, the Central management
address Setting screen appears.
3 Select Central management addresses to be automatically
assigned from [
3-(1)]
If this is tapped, the following message appears: [Automatic
assignment of TU2C-LINK1 (or TU2C-LINK2) will be performed.
Continue?]
4 Tap [4-(1)]
Automatic assignment of the Central management address is
performed for the selected TU2C-LINK. (takes a maximum of
about 6 minutes)
1
-(1)
1
-(1)
2
-(1)
2
-(1)
4
-(1)
4
-(1)
3
-(1)
3
-(1)