1.Product Overview
Names and functions of parts 13
Product Overview
Operation panel
BV410T
No. Name of part
1 LCD (128x64 dots)
Shows the state of the printer by using letters, numbers, katakana, kanji, and symbols.
2 ONLINE lamp (blue)
Lights when communications with the computer are possible.
Flashes when communicating with the computer.
Flashes slowly while in energy-saving mode.
Flashes at the same timing as the ERROR lamp when the power is turned off.
3 ERROR lamp (orange)
Lights when any problems occur on the printer.
Flashes at the same timing as the ONLINE lamp when the power is turned off.
4[FEED] button
Use to feed one sheet of media or to eject one sheet of media.
Use to align the position of the media.
Use for various settings.
5[RESTART] button
Use to restart printing after printing has been paused.
Use to restart when an error is resolved. However, some errors cannot be resolved by the
[RESTART] button.
P.68 “Error messages (BV410T)”
Use for various settings.
Initializes status after power is turned on.
6[PAUSE] button
Use to pause printing.
Shows Help.
Use for various settings.
FEED
ONLINE
ERROR
RESTART
PAUSE
[
3
]
[
4
]
[
5
]
[
6
]
[
1
]
[
2
]
To Next Page
Loading...
