Toshiba BV410T- TS02-QM-S - When Purchasing the Power Cable

2.Printer Setup
Preparing to use the printer 19
Printer Setup
 When purchasing the power cable
In some countries/regions, the power cable is not provided with this printer. In this case, use a power cable approved
for your country/region.
*1 At least, 125% of the rated current of the product
Power cable instructions
1.For use with 100 – 125 Vac mains power supply, select a power cable rated Min. 125 V, 10 A.
2.For use with 200 – 240 Vac mains power supply, select a power cable rated Min. 250 V, 10 A.
3.Select a power cable with the length of 2 m or less.
4.The power cable plug connected to the AC adapter must be able to be inserted into an ICE-320-C14 inlet. Refer to
the following figure for the shape.
Country/Region North America Europe United Kingdom Australia South Africa
Power cable
Rated (Min.)
Type
125 V, 10 A
SVT
250 V
H05VV-F
250 V
H05VV-F
250 V
AS3191
approved,
Light or Ordinary
Duty type
250 V, 6 A
H05VV
Conductor size
(Min.)
No. 3/18AWG
3 x 0.75 mm
2
3 x 0.75 mm
2
3 x 0.75 mm
2
3 x 0.75 mm
2
Plug
configuration
(locally approved
type)
Rated (Min.)
125 V, 10 A 250 V, 10 A
250 V
*1
250 V
*1
250 V
*1