62 Daily maintenance
0.Daily maintenance
Clean the printer periodically (at each media replacement) to ensure that clear prints can always be obtained.
The print head and the platen unit, in particular, can easily get dirty. Clean them with the procedure below.
Do not splash water directly or clean with a cloth containing a large amount of moisture.
Allowing water to enter inside the printer could cause fire and electric shock.
Turn off the POWER button and unplug the power plug from the electric outlet.
Cleaning with the power on could cause fire and electric shock.
Do not clean the printer with a cleaner that contains paint thinner, benzine, and flammable gas, for example.
This could cause fire.
Immediately after printing, do not touch the print head or its surrounding area.
This could cause burns.
Cover
1
Turn off the POWER button and unplug the power plug from the electric outlet.
2
Wipe dirt off the cover with a dry, soft cloth.
Wipe any particularly conspicuous dirt with a soft cloth containing a small amount of water.
Never use paint thinner, benzine, or other chemicals. Using them could cause discoloration of the cover and breakage
of plastic parts.
To Next Page
Loading...
