11. Maintenance 21
2
Wipe the media sensors with a soft cloth or a cotton swab slightly moistened with absolute (pure)
ethyl alcohol.
To remove dust or paper particles, wipe the media sensors with a dry soft cloth.
Platen roller
1
Turn the power off and open the top cover.
2
Wipe the platen roller with a soft cloth slightly moistened with Silicone oil.
Do not apply alcohol to the platen roller. This may cause deteriorate the platen roller.
Media housing
1
Turn the power off and open the top cover.
2
Wipe the media housing with a dry soft cloth.
If dirt still adheres, wipe it off with a soft cloth slightly moistened with mild detergent solution.
To Next Page
Loading...
