6F8C1118
xiii
Procedure flow
Preparation
・
Check the content of package
against the packing list
・
Determine the installation site
”1.3 Installation Requirements” on
page 5
Installation
・
Install the module in the basic unit.
・
Connect external equipment to the
module.
・
Connect the power supply
”Chapter 2 Installation” (page 11)
Power ON
・
Turn on the main unit power.
”3.1 Power On and Power off” on
page 21
User the software
・
Backup
Backup the operating system
pre-installed in hard disk to a
reserve disk.
・
Install the application
Install the application according
to the instruction in the manual.
To Next Page
Loading...
