Toshiba CANVIO AEROMOBILE - Regulatory and Safety Information; Wireless LAN Safety and Regulations; Federal Communications Commission (FCC) Notice

3
3. Copy the firmware to the Canvio
AeroMobile Wireless SSD
Copy the firmware directly to the root folder on your Canvio
AeroMobile Wireless SSD.
4. Turn on the Wireless LAN mode
1 Disconnect from the computer, and then turn On the
Canvio AeroMobile Wireless SSD.
2 Turn On the Canvio AeroMobile Wireless SSD by
pressing and holding the
On/Off button for 2 seconds.
The Wireless LAN mode will then turn on.
SD™ Card indicator light
Wi-Fi
®
/SSD indicator light
Battery indicator light
On/Off button
Reset button
USB 3.0 port
SD Card slot