56
Settings Management
Using the Settings Management
This window shows the amount of available disk space remaining on
your Canvio AeroMobile Wireless Solid State Drive. If an SD Card is
available, its disk information also is displayed.
Reset to Factory Setting (Web browser only):
1 In the System Settings window click or touch Reset
Settings
to open the Reset Settings window.
(Sample Image) Reset Settings window
All information stored on the Canvio AeroMobile
Wireless Solid State Drive will be erased during this
formatting process.
Be sure to save your data to another storage device
before executing this procedure.
2 To restore your Canvio AeroMobile Wireless Solid State Drive
to its original Factory Default settings, move the switch to
the
ON position.
3 Click or touch the
Save button.
Upgrade Firmware:
1 In the System Settings window click or touch Upgrade
Firmware
to open the Upgrade Firmware window.
2 Click or touch the
Online Upgrade button.
If new Firmware is available, the following screen appears.
(Sample Image) Upgrade Firmware window
To Next Page
Loading...
