104
No.
3
Part name
Adjust corner
cap
Procedure
1. Detachment
1) Pull knob of the adjust corner cap to the
arrow direction, remove strap of the
adjust corner cap from pin of the panel
and then remove all the 4 corners of the
cap.
NOTE :
The knob is provided to only one side.
Be sure to remove the cap of the knob side
at first.
2. Attachment
1) Hook the strap of the adjust corner cap
securely to the pin of the ceiling panel.
2) Insert the 2 claws “A” of the adjust corner
cap into rectangular holes of the ceiling
panel in the direction of the arrow.
3) Press the adjust corner cap so that the
3 claws “B” on the back of the cap are
fitted.
Remarks
To Next Page
Loading...