Discharge port cabinet
No.
d
Part name
Discharge port
cabinet
Procedure
1. Detachment
1) Perform work of Detachment 1 of
c
.
2) Remove screws for the discharge port
cabinet and the partition plate.
(M4, 8 mm, 3 pcs.)
3) Remove screws for the discharge port
cabinet and the bottom plate.
(Hexagonal screw M4, 10 mm, 2 pcs.)
4) Remove screws of the discharge port
cabinet and the motor base.
(M4, 8 mm, 2 pcs.)
5) Remove screws of the discharge port
cabinet and the heat exchanger.
(M4, 8 mm, 1 pc.)
6) Remove screws of the discharge port
cabinet and the fin guard.
(Hexagonal screw M4, 10 mm, 2 pcs.)
Remarks
1) Perform work of Detachment 1 of
c
.
2) Remove screws which fix the inverter
assembly and the side cabinet.
(M4, 8 mm, 2 pcs.)
3) Remove screws of the side cabinet and the
valve fixing plate. (M4, 8 mm, 2 pcs.)
4) Remove screws of the side cabinet and the
pipe panel (Rear).
(Hexagonal screw M4, 10 mm, 2 pcs.)
5) Remove screws of the side cabinet and the
bottom plate.
(Hexagonal screw M4, 10 mm, 1 pc.)
6) Remove screws of the side cabinet and the
heat exchanger.
(Hexagonal screw M4, 10 mm, 3 pcs.)
7) Slide the side cabinet upward and then remove
it. (Hook of inverter)
Side cabinet
e
f
Inverter
protective cover
1) Perform work of Detachment 1 of
c
.
2) Take off screw which fixes the inverter
assembly and the inverter protective cover.
(M4, 8 mm, 1 pc.)
To Next Page
Loading...
