High-Wall Type
Installation Manual
ā31ā
Toshiba
5. Assemble the removed parts by reversing
steps 1 to 4.
Insert the sensors and motor lead (louver
motor, fan motor) into the original positions.
CAUTION
Connect the sensor and the motor lead certainly
back to the previous position. If they are not
properly connected, the system will not operate or
other errors may occur.
ON
MCC-1510
ON
21
SW01
B
SW01: OFF
ON
12
ON
12
SW02: OFF
SW01: ON
SW02: OFF
Factory default
After setting
31-EN
+001111052201_00Ta.book Page 31 Friday, November 20, 2009 11:45 AM
To Next Page
Loading...
