Remote controller with weekly timer
Owner’s Manual
–20–
5 Push the button (42).
• Enter the number of the program to be
cleared.
• The program number on the numeric
display blinks.
6 Push the button (41).
• The settings for the program number on
the numeric display are cleared (deleted),
and the no program set status blinks on the
screen.
* Bear in mind that cleared settings
cannot be restored.
7 To continue clearing, repeat steps 2
to
6.
8 Finally, push the button (46) to
return to the original screen.
Editing the operation programs
(instructions for special
holidays)
• A “special holiday” is a day of the week on
which the scheduled operations set for
that day of the week can be temporarily
canceled. (The program remains stored in
the memory.)
• When the day of the week set as a special
holiday has passed, the special holiday
setting is released, and the air conditioner
operates as per the original program
starting from the following week.
• Special holiday settings can be
established for any day up to a week
ahead starting from the current day of the
week. When a special holiday has been
set for the current day of the week, the
setting starting from the next program time
after the set time will be canceled.
• The special holiday setting cannot be
established for any day of the week which
has no program settings.
* The special holiday setting can be
established whether the air conditioner
is running or shut down.
How to establish the special holiday setting
1 Push the button (46).
• The display transfers to the program input
screen.
• The entire LCD screen blinks.
2 Push the button (45).
• Repeatedly push the button until the day
arrow moves to the day of the week
which is to be set as a special holiday.
3 Push the button (42).
• Enter the day of the week which is to be set
as a special holiday.
• The days of the week display and day
arrow stop blinking and light up.
4 Push the button (37).
• Repeatedly push this button
until “PG-HL” (shown right)
appears on the numeric display.
* PG-HL ...... P
ROGRAM-HOLIDAY
5 Push the button (42).
• The special holiday display blinks at the
day of the week which has now been set as
a special holiday.
6 To continue with another setting,
repeat steps 2 to 5.
7 Finally, push the button (46) to
return to the original screen.
• The special holiday display above the
day of the week set stops blinking and
lights up.
How to cancel the special holiday setting
1 Perform steps 1 to 4 in “How to
establish the special holiday setting”
for the day of the week whose special
holiday setting is to be canceled.
2 Push the button (42).
• The special holiday display over the day
of the week set changes from lighted to
blinking.
3 Finally, push the button (46) to
return to the original screen.
• The special holiday display above the
day of the week set stops blinking and goes
off.
19-EN
+00EH99677901_01EN_OM_Remo_Weekly_UL.book Page 20 Thursday, October 8, 2009 2:03 PM
To Next Page
Loading...
