Toshiba CF27H50 - Connecting VCR to Antenna;Cable; Connecting Antenna;Cable TV with VCR; Connecting Cable TV, Decoder, and VCR

Antenna/Cable TV Connection (Continued)
After ANTENNA/CABLE connections are made, you are still required to connect the VCR using VIDEO/AUDIO
connecting cables for playback of good quality from the VCR. See page 32.
Antenna
or Cable
lead-in
AUTO v IOEO
ROUTL OUT
@@@
ANT
(75D)
@
VCR
Note: Tape playback may often cause the VCR to interrupt antenna signal to the TV. If you cannot select a certain
channel, try pressing the FV/VCR button on the Remote Control.
Cable I_ 2-way
lead-in signal
splitter
Cable TV converter/ IN
decoder
OUT
*A/B switch
OUT
VCR
Note: "A" position on the A/B switch (*) allows you to select unscrambled channels using the TV's channel keys.
"B" position on the A/B Switch allows you to select scrambled channels via the cable TV converter/decoder using
the converter's channel keys. Place your TV and VCR on channel 3 or 4 to match the converter's output channel.
6