:Selecting Stereo/SAP Broadcasts
The MTS (Multi-channel TV Sound) feature allows you to improve your TV viewing with high fidelity stereo sound.
This TV also allows you to activate or deactivate the stereo surround sound effect.
MTS also provides for an extra'channel, SAP (Second Audio Program), used to transmit a second language or otlner
audio information.
...........e e 6"%
_-- ADV-- - -- +
L÷
-- ADV
MENU
• CHANNEL •
0 0
-- --/+
MENU
ADV T--
©
J
STOP SOURCE PLAY PIP
CK)
qEC TVNCR REW FF
®0®®
S rILL LOCATE SWAP
TOSHIBA
2
3
4
ADV •
-- SUR
When the TV receives a stereo broadcast,
the word "STEREO" is displayed on the
screen whenever the TV is turned on, a
channel is selected, or the RECALl_ button
is pressed.
m
STEREO
TV 4
Press MENU repeatedly until the Audio
menu is displayed on the screen.
Press ADV repeatedly until "MTS" is
displayed in magenta.
If a stereo broadcast is received, "STR"
will be displayed in yellow.
I4TS: [STR ]SAP IVONO
....... J,.......
ro SELECT ITEM PUSH ADV
rO CONTROL PUSH - +
Press - or + until "STR" (stereo) is
displayed in magenta.
Normally this function can bb left in
"STR" mode. Your TV will then automati-
cally reproduce either stere() or
monaural sound, whichever is broadcast.
[STR} :
TO SELECT ITEM PUSH ADV
TO CONTROL PUSH - +
L__
If the stereo sound is noisy
Be sure you have selected "STR" mode if broadcast is in stereo. How-
ever, if a broadcast signal is not strong enough, and noise-free stereo
sound is not available, select "MONO" (monaural) mode.
The noise should be reduced.
1 Select the STEREO mode as described
above.
2 Press SUR repeatedly until "SURROUND
ON" is displayed in magenta.
The surround function has now been
activated.
SURROUND ON
To deactivate the surround effect
Select "SURROUND OFF" in step 2 above.
Note: Normally you can leave the "STR" mode turned on and the
surround function activated. The TV will automatically produce
either surround stereo or monaural, whatever is broadcast.
20
To Next Page
Loading...
