Using Closed-Captioned Function
-- ADV
MENU
• CHANNEL •
0 0
-/+
C.CAFG_
MENU
ADV •
•_-_-----%_.CAPT RECAL _,L/_1"__.
OOU
©®Q8
®®®
©®®8
o
FAV
RESET_
-- RECALL
ADV •
-- 4-
Note: • T.
A closed-captioned signal may not be
decoded in the following situations.
- When a video tape has been dubbed.
- When the signal reception is weak.
- When the signal reception is non-
standard.
Closed-captioning is a printed version of the dialogue, narration, and/or
sound effects of a TV program.
Captions will appear at either the top or bottom of the screen during
captioned broadcasts as shown.
Captioning is especially helpful for hearing impaired individuals.
1 Select the desired program.
2
Press RECALL to check if the program is
being captioned. If it is, the 'word "CAP-
TION" is displayed on the screen
The captioned programs are usually
notated on your local TV listings by its
service marks such as "CC".
CAPT ION
TV
3
Press C.CAPT on the Remote Control to
call up the CLOSED CAPTION menu.
Usable selections are displayed in yellow.
Press C.CAPT repeatedly until "C1",
"C2", "C3" or "C4" is displayed in
magenta. ("C1" stands for CAPTION 1,
for example.)
Select "C1" for translation o.f the prim_ary
language in your area.
Select "C3" for captioning information
usually of secondary languages.
"C2" or "C4" carry Closed Captioning but
not necessarily in the same, time frame as
the sound from the program.
CLOSED CAPTION
[C1]C2 C3 C4
T1 T2 T3 T4
OFF
TO SELECT PUSH C.CA£T
You can also select this feature using the on-screen menu function.
2
Press MENU repeatedly until the Option
menu is displayed on the screen.
Press ADV repeatedly until "C.CAPT" is
displayed in magenta.
C O#f7 C? ¢:2 C3 C4 T7
T2 13 T4[OFF I
TO SELECT ITEM PUSH ADM
TO CONTF_OL PUS4 +
3
Press - or + to select "C1 .... C2", "C3" or
"C4".
Z
'--=:_- lCfJ C2 Cot C4
TO SELECT ITEM PUSH ADV
TO CONTROL PLSH - •
To deactivate this feature
Select "OFF" in the closed caption mode display/.
26
To Next Page
Loading...
