6 Press ADV to lock out the channel•
The display at the right will appear on the
screen for about 4 seconds.
CH 4
LOCKED
1234
.
7 Flepeat steps 1 to 6 for other channels.
.]his TV has 4 memory spaces total for the TV mode and CABLE
-rnode respectively.
- Note: If a different code number is used whenever you lock out a
channel, the last one has priority over the preceding ones.
8 Select another channel, or turn off the TV if desired.
1
2
3
Select "CLEAR" following the steps 2 to 4
on the previous page.
CH LOCK IV
CLEAR ....
0 0 15 G_ 4
TO SELECT PUSH - *
TO ENTE_ _.DIG_T CODE
PUSH 0-9
TO SET PUSH AOV
Press the 4-digit code used to lock out the channels with the Number
buttons.
Press ADV.
If you have entered the correct code
The display shown at the right appears.
CLEARED
1234
t-
o
O
,-I
' ii i
I:f a wrong code has been entered
f'hese messages appear. Try to enter the
i_orrect code again.
WRONG CODE
ENTER CORRECT CODE
P
-k
If you want to knovvthe channels you have locked out
Call up the channel lock adjustment mode using the Setup menu.
29
To Next Page
Loading...
