6
Press • or • to lock out the channel,
The display at the right will appear on the
screen for about 4 seconds.
CH 4
LOCKED
1234
7 Repeat steps 1 to 6 for other channels.
Note: If a different code number is used whenever you lock out a
channel, the last one has priority over the preceding ones.
8 Select another channel before turning off the TV.
1
Select "CLEAR" following the steps 2 to 4
on the previous page.
CH LOCK TV
CLEAR ....
0 0 15 4
TO SELECT PUSH < •
TO ENTER 4.01GIT CODE
PUSH 0-9
TO SET PUSH • •
2 Pressthe 4-digit code usedto lockout the channelswith the Number
buttons.
3 Press • or •.
If you have entered the correct code
The display shown at the right appears.
p,
J=
(J
o_
C
om
0
o
.J
CLEARED
1234
If a wrong code has been entered
These messages appear. Try to enter the
correct code again.
WRONG CODE
ENTER CORRECT COOS
If you want to know the channels you have locked out
Call up the channel lock adjustment mode using the Setup menu.