Connecting a Standard VCR
Connect VIDEO 1 or VIDEO 2 IN jacks on the rear of the TV to the video/audio output jacks of an installed VCR, Laser
Disc player, video camera etc. for playback of video material.
Antenna/Cable
lead-in
Antenna
input
o ut,,Osll!
Video
output
Video cable (not supplied)
Audio cable (not supplied)
ANT
MENU "I_/NIOEO _
O _JO 0 0 0
TV/VIDEO
FAV CH TVMDEC
C23 r-_-I IB-
(_ I--_ (_[_REC WNCR STOP
SLOW PAUSE REW FF
f3£3 nn 1313r-_
TOSHIBA
TV/VIDEO
To operate your TV and video equipment properly, refer to the instruc-
tions furnished with the video equipment.
1
2
Turn the "IV and VCR ON.
Press TV/VIDEO to select "VIDEO 1".
Each time you press the button, TV,
VIDEO 1, or VIDEO 2 source will be
selected in order.
The selected source will be displayed in
purple.
TV
VIDEO 1
VIDEO 2
TO SELECT PUSH TV/VIDEO
3 Operate your VCR normally.
Notes:
• The VIDEO 2 IN jacks can also be used for connecting a second piece of
video equipment with video/audio outputs. To view video from
equipment connected to the VIDEO 2 IN jacks, select "VIDEO 2".
• If you connect a monaural VCR, connect the audio output of the VCR to
the L/MONO jack of the VIDEO 1/2 IN jacks on the "IV.
30
To Next Page
Loading...
