Antenna/Cable TV Connection
You can use either an indoor or outdoor antenna to receive VHF and/or UHF channels.
Channels 2 - 13 are VHF channels, and channels 14 - 69 are UHF channels.
We recommend using an outdoor antenna for better picture quality.
You can receive Cable TV by connecting a cable supplied by your local cable company.
VHF,
UHF
or Cable
VHF
UHF
F-type connector
(Not supplied)
.75-ohm coaxial cable
300-ohm
Antenna adapter
(Not supplied)
OR
(Not supplied)
Back of TV
Cable "IV
lead-in
_ 2-way
signal
splitter
(Not supplied)
IN OUT
Cable "IV converter/
decoder
A
mm
*NB switch J[
(Not supplied)
ANT
(75t3)
@
Notes:
*"A" position on the A/B switch allows you to select unscrambled channels using the TV's channel keys.
"B" position a_ows you to select scrambled channels via the converter/decoder box using the converter's channel
keys. Plac_your "IV on channel 3 or 4 to match the converter's output channel.
• If you use a VCR, connect its antenna in/out between the decoder box and A/B switch.
o
Q
C
C
o
o
J_
o
e-
€
Q
€
o
€_
=
€
€
o
m
"o
5
To Next Page
Loading...
