Strata CTX Programming - Part 2: CTX WinAdmin Programming 11/03 6-1
Trunks
Trunks 6
This chapter provides trunk programming information for Strata CTX.
304 Incoming Line Group
Program Number(s): 304
Incoming Line Groups (ILG) is a line selection feature which enables the use of external trunk or private
line groups for incoming service.
1. Complete the “ILG Record Sheet”
on page D-21.
2. From the Program Menu, click
Trunk > ILG. The Trunk ILG
screen displays (shown right).
3. Enter an ILG number
...or click one of the following
buttons:
• List – view a summary list of
programmed ILGs.
• Create – Assign a new ILG
with default settings.
• Copy – Enter an ILG in the
Group Number field and click
Copy to make a new ILG
assignment with settings copied from the ILG entered in Group Number.
• Delete – Delete an ILG.
4. Enter Program 304 data.
5. Click Submit.
To Next Page
Loading...
