Trunks
309 Direct Inward Dialing
Strata CTX Programming - Part 2: CTX WinAdmin Programming 11/03 6-13
Trunks
309 Direct Inward Dialing
This command assigns DID number analysis tables to ILGs.
1. Complete the “DID Assignment
Record Sheet” on page D-25.
2. From the Program Menu, click
Trunk > DID. The Trunk DID
Assignments screen displays
(shown right).
3. Select an ILG Number.
4. Enter a DID Number in the 01 DID
Number field
...or click one of the following
buttons:
• List – view a list of programmed
DIDs.
• Create – Make a new DID assignment using default settings.
• Copy – Enter a DID Number in 01 DID Number and click Copy to make a new DID assignment
with settings copied from the DID Number entered.
• Delete – Delete a DID.
5. Enter DID Assignment data.
6. Click Submit.
FIELD DESCRIPTION
ILG Group Number Select the ILG number.
Possible values: 1~32 (CTX100), 1~50 (CTX670 Basic), 1~128 (CTX670 Exp),
(default = no value)
01 DID Number Enter a DID number.
Possible values: 1~7 digits may include wild card “?” where “?” = 0~9 (default = no
value).
02 MOH Source Set Music On Hold for Analog ISDN DID Trunk
Possible values: Quiet Tone or External 1~15 (default = External 1)
03 GCO Key Group GCO Key Group number.
Possible values: 0~32 (CTX100), 0~50 (CTX670 Basic), 0~128 (CTX670 Exp),
(default = 0)
04 Pool Key Group Pooled Line Key Group
Possible values: 0~32 (CTX100), 0~50 (CTX670 Basic), 0~128 (CTX670 Exp),
(default = 0)
05 Audio Day1 Dst Type
06 Audio Day2 Dst Type
07 Audio Night Dst Type
Select the Destination Type for Audio/Speech calls
Possible values: No Data (default), Dialing Digits, DISA, Built-in Modem or Night Bell
To Next Page
Loading...
