Services
540 Pilot DN Assignment
9-4 Strata CTX Programming - Part 2: CTX WinAdmin Programming 11/03
580 Voice Mail Port Data
Prerequisite Program: None
Assign characteristics of individual voice mail ports.
1. Complete the “Voice Mail Port
Data Record Sheet” on page D-39.
2. From the Program Menu, click
Services > Voice Mail > Voice Mail
Port Data.
3. Enter a VM Port DN
...or click one of the following
buttons:
• List – view a summary list of
programmed VM Port DNs.
• Copy – Enter an VM Port DN
value in the field with the same
name. Click Copy to make a
new VM Port DN assignment with settings copied from the Port entered in VM Port DN.
4. Enter Program 580 data.
5. Click Submit.
11 CF - All Call Record Enter DTMF VM-ID prefix string for calls arriving to voice mail via “Call Fwd All
Calls.”
Possible values: Up to 4 ASCII characters (default = 91)
12 CF - Busy Record Enter DTMF VM-ID prefix string for calls arriving to voice mail via “Call Fwd Busy.”
Possible values: Up to 4 ASCII characters (default = 91)
13 CF - No Answer
Record
Enter DTMF VM-ID prefix string for calls arriving at the voice mail via “Call Fwd
No Answer.”
Possible values: Up to 4 ASCII characters (default = 91)
14 Direct Call Enter DTMF VM-ID string for a call arriving at the voice mail as a Direct Call.
Possible values: Up to 4 ASCII characters (default = 91)
15 Retrieve Messages Enter DTMF VM-ID string for calls arriving at the voice mail to retrieve messages.
Possible values: Up to 4 ASCII characters (default = 92)
16 Voice Main DN Use a VM Pilot DN as a transfer destination.
Possible values: Up to 7 ASCII characters (default = no value)
17 Length of VM ID Select the number of characters in VM-ID string.
Possible values: 1~10 (default = 10)
1.
FIELD DESCRIPTION
To Next Page
Loading...
