Toshiba CTX100-S - Page 352

Telephone Button Programming
200 Series Programs
13-38 Strata CTX Programming - Part 3: Telephone Button Programming 11/03
Table 13-18 10 Button (when FB03 value is 10)
PATTERN1 PATTERN2 PATTERN3 PATTERN4
FB01 Primary DN Primary DN Primary DN
None
FB02 CO 1 CO 1
No Data
FB03 CO 2 CO 2
FB04 CO 3 CO 3
FB05 CO 4 CO 4
FB06 CO 5
Single Touch Button
FB07 CO 6
FB08 CO 7
FB09 CO 8
FB10 Do Not Disturb Do Not Disturb
Table 13-19 14 Button (when FB03 value is 14)
PATTERN1 PATTERN2 PATTERN3 PATTERN4
FB01 Primary DN Primary DN Primary DN
None
FB02 CO 1
No Data No Data
FB03 CO 2
FB04 CO 3
FB05 CO 4
FB06 CO 5
FB07 No Data
FB08 CO 7
FB09 CO 8
FB10 CO 9
FB11 CO 10
FB12 CO 11
FB13 Do Not Disturb
FB14 No Data
Table 13-20 Program 205
Button Sequence Value(s) Summary
205
DKT Feature Keys.
 , +ROG
The Feature Key assignment allows each key on the telephone to be
addressed and assigned a code representing the function to be
performed. Some feature keys require additional parameters to
completely define the key. For example, a Phantom DN needs a
directory number, ringing assignment, and the tone pitch when ringing
occurs.
205-00 Primary DN
n,
+ROG
n = 0~99999 Enter a Primary DN number to program FBs.
Note FB04 Add on Modules in Program 204 must be set to One or
Two.