Telephone Button Programming
900 Series Programs
13-106 Strata CTX Programming - Part 3: Telephone Button Programming 11/03
Note Before running this program, make sure the SmartMedia card is properly formatted. See “Format/
Unmount SmartMedia” on page 13-103 for more details.
1. Press
)% to enter your Backup choice. Press the 6FUROO or 3DJH button to view your selection
options.
2. Press
. )% and )% should blink green.
3. Press
+ROG to execute. Press +ROG again to Cancel. This program stops running if you exit
programming mode from your telephone.
➤ To view Backup progress
1. While the program is running (
)% and )% blink green), press )% to view the total number of
files to be transferred.
2. Press
)% to view the current file number that is being transferred.
3. The Backup is complete when
)% blinks intermittently.
4. To verify success, push
)%. Your telephone LCD should indicate *1.ALL_OK.
5. Press
+ROG to exit.
Note Do not press the +ROG button. Pressing the +ROG button restarts the Backup procedure.
To Restore data from the SmartMedia card to Strata CTX, see “System Initialize” on page 13-96.
Program Update
This program enables you to update the Strata CTX programs.
Program Number(s): 911
Prerequisite Program:
Format SmartMedia Card
Reference: None
Access Sequence: Login to programming mode from your telephone button pad:
+ROG✱✱✱✱✱.
At the PASSWORD= prompt, Enter your password and press+ROG.
At the PROG= prompt enter and press +ROG.
Backup State
04 All_Ok – Backup completed with no errors.
Partial_Ok – Backup has completed with
errors.
NG – Backup has failed.
Cancel – Cancel Backup.
Importing – Program data is being
restored.
Exporting – Program data is being sent out.
1:normal end all
2:normal end part
3:abnormal end
4:cancel
5:importing
6:exporting
FB Name FB Summary Value LCD Prompt
Update Function 01 Enter 1 or 2 to identify the type of Update
intended.
Select 3 to cancel a running update.
1:Update
2:Reboot
3:Cancel
1:Update
2:Reboot
3:Cancel
FB Name FB Summary Value LCD Prompt
To Next Page
Loading...
