Software and Firmware Updates
IP Telephone/BIPU Firmware Update Procedures
Strata CTX Programming - Part 4: Appendices 11/03 E-9
7. From File Name box enter: DIPXXXX
8. Click Start and observe the update status: Getting Updated file\Updating\Finished
Updating\Resetting\idle.
Notes
● It could take 1 to 5 minutes to update the BIPU
● If an error occurs, recheck file names, locations etc. and try again.
9. After the update is complete, select IP Telephone > IP Telephone Data. Select the IP telephone Prime
DN to check that the firmware version level has been updated properly.
➤ To check the IP telephone firmware version directly from an IP telephone
1. Simultaneously press the
+ROG buttons on the IP Telephone.
2. At the SELECT = prompt, press
then press +ROG
3. At the Select function key prompt, press )%, the IP telephone will be displayed.
4. To exit this mode, go off and on hook.
To Next Page
Loading...
