System
I/O Device
Strata CTX Programming - Part 2: CTX WinAdmin Programming 11/03 4-31
System
04 Server Port Number Enter the Server Port Number and proceed to 07 Read Retry Number. This field is
required if Server was selected in 02 PC Operation Type above. If not, leave this field
blank and proceed to 05 Client IP Address.
Possible values: 0~65535 (default = 0)
Note Use 6000 for Network BLF, 3000 for Network DSS and 5000 for Network
TPI.
05~08 Client IP
Address
Enter the Client LAN IP Address. This field is required if Client was selected in 02 PC
Operation Type above.
Possible values: 0~255 for each octet (default = 0)
Note Enter IP address of Stratagy iES32 or SES.
09 Client Port Number Enter the Client Port number. This field is required if Client was selected in 02 PC
Operation Type above.
Possible values: 0~65535 (default = 0)
10 Read Retry Number Select the Read Retry counter.
Possible values: 0~10 (default = 1)
11 Write Retry Number Select the Write Retry counter.
Possible values: 0~10 (default = 1)
FIELD DESCRIPTION
To Next Page
Loading...
