Operation of Controls (Remote Control)
This Remote Control allows you to control the functions of your TV set from 16 feet
(5m) away. Before attempting to operate the Remote Control, install the batteries
according to Instalhng and replacing batteries" below.
For specific use of each control, consult the corresponding page numbers in brackets.
U
'661
966j
9
o__]o-
--®
--@
--®
--0
--®
®
®
@
®
POWER button
Press to turn on the TV.
Press again to turn off the "iV.
CHANNEL _ buttons (Dual functions with
®)
Press A to select next higher channel.
Press • to select next lower channel.
Channel Number buttons
To select channel 4, press "4" (or press "0",
"4"),
To select channel 38, press "3", "8".
To select channel 125, press "100", "2", "5"
in sequence.
VOLUME •/• buttons (Dual functions with
@l
Press • to increase the volume.
Press • to decrease the volume.
(_ RECALL button [10]
(_ CH RTN button [10]
(_ MUTE button [10]
(_ EXIT button [7]
(_ W/VIDEO button [10]
MENU button [7]
_) Menu A/• buttons [7]
@ Menu •/• buttons [7]
1 Place the Remote Control with the face
down, then press down on the ridged
area of the battery cover and slide it off.
2 Place the two "AA" size batteries,
matching the + and -signs on each
battery to the + and - signs of the
battery compartment.
3 Replace the battery cover until the
lock snaps•
CAUTIONS:
• Do not throw your batteries into a fire.
Dispose of your batteries in a designated
disposal area.
• Do not combine used old batteries with new
ones.
• Do not mix battery types.
Notes:
• If your Remote Control does not always
adjust the set as you wish, you probably
need to replace the batteries.
The life expectancy of the battery is about
one year.
• Remove dead batteries immediately to
prevent battery acid from leaking into the
battery compartment.
• If you do not intend to use the Remote
Control for s long period, remove the
batteries.
6
To Next Page
Loading...