Toshiba D-R160SB - Recording from External Sources

Recording
56 EN
Settings for an external equipment (cont’d)
Recording from an external equipment
REC MODE
REC
PROGRAM
ON/STANDBY
I /
y
65
2, 3
4
8
Before recording from external equipment, see page 25
for connection instructions.
1
Turn the TV and the unit on, and select the
input of the TV to which the unit is connected.
2
Press [OPEN/CLOSE A] to open the disc tray,
then place the disc to record on.
3
Press [OPEN/CLOSE A] to close the disc tray.
4
Select the input terminal to which the external
equipment (AV1, AV2, AV3 or AV4) is
connected using [PROG.
/ ] or [the Number
Buttons].
• To use the input jacks on the back of the unit, select the
“AV1”, “AV2” or “AV3” position by pressing [0], [0], [1] or [0],
[0], [2] or [0], [0], [3] on the remote control or using
[PROG.
/ ].
• To use the input jacks on the front of this unit, select “AV4”
position by pressing [0], [0], [4] on the remote control or using
[PROG.
/ ].
Start
This operation may take awhile to
be completed.
05RecordingBD.indd5605RecordingBD.indd56 2006/02/2418:03:072006/02/2418:03:07