Toshiba D-R160SB - Page 57

Recording
Playback EditingIntroduction Connections
Basic Setup
Function Setup Others
57EN
5
Select a recording mode using [REC MODE].
(See page 36.)
XP SP LP
EPSLPSEP
6
Press [REC I] on the unit to start recording.
7
Press the PLAY button on the external
recording component.
8
Press [STOP C] on the front panel of the unit
to stop recording.
Note
• During recording, if a signal other than PAL is detected (such as NTSC), recording is paused.
• If you want to monitor the programme that you are recording, make sure the device such as a set top box is turned off when
it is connected to AV2.
This operation may take awhile to
be completed.
05RecordingBD.indd5705RecordingBD.indd57 2006/02/2418:03:072006/02/2418:03:07