Toshiba D-VR16SB - Settings for an external equipment (contd)

Recording
60 EN
Settings for an external equipment (cont’d)
4
Select a recording mode using [REC MODE].
Refer to “Recording Mode” on page 38 for DVD or page 128 for
VCR.
5
Press [I REC] on the unit to start recording.
6
Press the PLAY button on the external
recording component.
7
For disc:
Press [C (STOP)] on the unit to stop recording.
For tape:
Press [A / C (EJECT/STOP)] on the unit to stop recording.
Notes
• During recording, if a signal other than PAL is detected (such as NTSC), recording is paused.
• If you want to monitor the programme that you are recording, make sure the device such as a set top box is turned off when
it is connected to AV2.
This operation may take awhile to
be completed.
05RecordingBD.indd6005RecordingBD.indd60 2006/03/2414:37:482006/03/2414:37:48