English - 27
System Setup
6
Press the …† buttons to select Edit, then press
the OK or √ button. Manual Setup menu is
displayed.
7
Press the œ √ buttons to start scanning the
channels. The frequency band is scanned and the
first station found is displayed.
8
Press the …† buttons to select Name.
The station name is set automatically from the
broadcast signal.
9
To change the programme’s name, press the √
button.
10
Press the OK button to save the name.
Manual Setup
If you have already set them automatically, you do not
need to preset the stations manually.
1
With the unit in Stop mode/No Disc mode, press
the MENU button.
2
Press the …† buttons to select Setup, then press
the OK or √ button.
3
Press the …† buttons to select Install, then press
the OK or √ button.
4
Press the …† buttons to select Manual Setup,
then press the OK or √ button.
5
Press the …† buttons to select the desired PR
number, then press the OK or √ button.
No Disc Setup
System
√√
Clock Set
√√
Install
√√
Language
√√
Audio
√√
Video
√√
Parental Control
√√
MOVE OK RETURN EXIT
Programme
Setup
No Disc Install
Auto Setup
√√
Manual Setup
√√
VIDEO Output CH : Ch 60
√√
MOVE OK RETURN EXIT
Programme
Setup
Manual Setup
MOVE OK
PR
CH
Name
Decoder
MFT
01
---
----
---❚ ---
Off
Save
Manual Setup
MOVE OK
PR
CH
Name
Decoder
MFT
01
2
----
---❚ ---
Off
Save
No Disc Manual Setup
PR CH Name Decoder Edit
01 ---
---- --
√√
02 ---
---- --
√√
03 ---
---- --
√√
04 ---
---- --
√√
05 ---
---- --
√√
06 ---
---- --
√√
07 ---
---- --
√√
MOVE OK RETURN EXIT
Edit
Delete
Swap
To...
Select a Character
Move to the next or
previous character
Then....
Press the
…†
buttons until the
required name character is
displayed (letters, numbers or
“ - ” character)
Press the
œ √
buttons
respectively.
VR25SB-1-eng 5/6/05 5:33 PM Page 27
To Next Page
Loading...
