28 - English
System Setup
11
Press the
…†
buttons to select Decoder.
Press the œ √ buttons to select On or Off.
Indicate whether you wish to use a decoder On or Off.
12
13
Press the
…†
buttons to select Save, then press
the OK button to confirm manual setting.
• Repeat this procedure from step 4 onwards, until
all the required stations have been stored.
14
Press the MENU button to exit the menu.
Clearing a Preset
Station
If you have stored a TV station:
• That you do not require
• At the wrong programme position you can cancel it.
1
With the unit in Stop mode/No Disc mode, press
the MENU button.
2
Press the
…†
buttons to select Setup, then press
the OK or √ button.
3
Press the
…†
buttons to select Install, then
press the OK or √ button.
4
Press the
…†
buttons to select Manual Setup,
then press the OK or √ button.
5
Press the
…†
buttons to select the desired PR
number, then press the OK or √ button.
Then....
• Press the
…†
buttons to select
MFT .
• Press the
œ √
buttons to adjust
the picture, if necessary.
• Select Save to store the station.
• Press the
…†
buttons to select
CH.
• Press the
œ √
buttons to go on
scanning the frequency band
and display the next station.
• Go back to the beginning of
step.
If you..
Wish to store the
station displayed
Do not wish to store
the station displayed
No Disc Setup
System
√√
Clock Set
√√
Install
√√
Language
√√
Audio
√√
Video
√√
Parental Control
√√
MOVE OK RETURN EXIT
Programme
Setup
No Disc Install
Auto Setup
√√
Manual Setup
√√
VIDEO Output CH : Ch 60
√√
MOVE OK RETURN EXIT
Programme
Setup
Manual Setup
MOVE OK
PR
CH
Name
Decoder
MFT
01
2
AABB
---❚ ---
Off
Save
No Disc Manual Setup
PR CH Name Decoder Edit
01 4 AADD
Off
√√
02 3 AACC
Off
√√
03 2 AABB
Off
√√
04 ---
---- --
√√
05 ---
---- --
√√
06 ---
---- --
√√
07 ---
---- --
√√
MOVE OK RETURN EXIT
Edit
Delete
Swap
VR25SB-1-eng 5/6/05 5:33 PM Page 28
To Next Page
Loading...
