English - 29
System Setup
6
Press the …† buttons to select Delete, then
press the OK or √ button.
7
Press the œ √ buttons to select Yes, and then
press the OK button.
8
Repeat the same procedure from Step 5 onwards
until all the required stations have been cleared.
9
Press the MENU button to exit the menu.
You can rearrange the Manual Setup Table and give
different programme numbers to the manual setup listed
according to your own preferences.
1
With the unit in Stop mode/No Disc mode, press
the MENU button.
2
Press the …† buttons to select Setup, then press
the OK or √ button.
3
Press the …† buttons to select Install, then press
the OK or √ button.
4
Press the
…†
buttons to select Manual Setup, then
press the OK or
√
button.
5
Press the
…†
buttons to select the desired PR
number, then press the OK or
√
button.
6
Press the
…†
buttons to select Swap, then press
the OK button.
• For example, to move a TV station in programme 1
to programme 3.
7
Press the
…†
buttons to select required position,
then press the OK button again to swap the position.
8
Press the MENU button to exit the menu.
Changing the Preset
Manual Setup Table
No Disc Setup
System
√√
Clock Set
√√
Install
√√
Language
√√
Audio
√√
Video
√√
Parental Control
√√
MOVE OK RETURN EXIT
Programme
Setup
No Disc Install
Auto Setup
√√
Manual Setup
√√
VIDEO Output CH : Ch 60
√√
MOVE OK RETURN EXIT
Programme
Setup
No Disc Manual Setup
PR CH Name Decoder Edit
01 4 AADD
Off
√√
02 3 AACC
Off
√√
03 2 AABB
Off
√√
04 ---
---- --
√√
05 ---
---- --
√√
06 ---
---- --
√√
07 ---
---- --
√√
MOVE OK RETURN EXIT
Edit
Delete
Swap
No Disc Manual Setup
PR CH Name Decoder Edit
01 2 AABB
Off
√√
02 3 AACC
Off
√√
03 4 AADD
Off
√√
04 ---
---- --
√√
05 ---
---- --
√√
06 ---
---- --
√√
07 ---
---- --
√√
MOVE OK RETURN EXIT
VR25SB-1-eng 5/6/05 5:33 PM Page 29
To Next Page
Loading...
