40 - English
System Setup
1
With the unit in Stop mode, press the P-SCAN button on
the front of the DVD Recorder & VCR.
The message “Press [Yes] to confirm Interlace scan
mode. Otherwise press [No]” will appear. Press the œ
√ buttons to select Yes, and then press the OK but-
ton.
2
The message “Please set your TV to Interlace input.
To deactivate, press [STOP] key.” will appear. Press
the OK button.
3
The message “Video Output Mode Interlace Scan”
will appear.
■
Do not press the P-SCAN button if you are
using a TV that does not support Progressive
mode. Nothing will be displayed on the screen
if pressed.
■
If you press the P-SCAN button by mistake
when your TV does not support Progressive
mode, you need to release the Progressive
mode. To release the Progressive mode, press
the P-SCAN button on the front panel 3 times.
The screen will recover after the PSO icon on
the front panel display turns off.
Note
Press [Yes] to confirm Interlace scan mode.
Otherwise press [No]
Yes No
Please set your TV to Interlace input,
To deactivate, press [STOP] key.
OK
Video Output Mode
Interlace Scan
Canceling the
Progressive scan
VR25SB-1-eng 5/6/05 5:33 PM Page 40
To Next Page
Loading...
